HIC/NACE Steel Plate Grade

SA 283 gr c vs sa 516 gr 70

What is SA 283 Gr C vs SA 516 Gr 70?

ASME SA 283 Gr C and SA 516 Gr 70 are both carbon steel plate specifications, but they differ in strength, heat treatment, and applications. SA 283 Gr C is a low-carbon steel for moderate-strength structures, while SA 516 Gr 70 is a normalized steel for higher-pressure vessels with superior toughness. As a leading Chinese manufacturer and exporter, Gangsteel offers high-quality sa 283 grade c steel plate under asme sa 283/sa 283m, providing cost-effective options for projects requiring moderate performance compared to SA 516 Gr 70.

 

Overview of SA 283 Gr C and SA 516 Gr 70

SA 283 Gr C is a low-carbon steel under ASME SA 283 for general structural and low-pressure vessel use, offering good weldability without heat treatment. SA 516 Gr 70 is a carbon-manganese steel under ASME SA 516, normalized for improved toughness in moderate and lower temperature pressure vessels. Gangsteel's sa 283 grade c steel plate is ideal for less demanding applications, complementing our range including sa 283 grade a steel plate, sa 283 grade b steel plate, and sa 283 grade d steel plate.

The table below summarizes key differences:

Property

SA 283 Gr C

SA 516 Gr 70

Standard

ASME SA 283

ASME SA 516

Type

Low-carbon structural steel

Normalized carbon steel

Yield Strength (min, ksi/MPa)

30 / 205

38 / 260

Tensile Strength (ksi/MPa)

55-75 / 380-515

70-90 / 485-620

Heat Treatment

As-rolled

Normalized

Applications

General structures, low-pressure tanks

Boilers, high-pressure vessels

Impact Testing

Not required

Required for low temperatures

 

Chemical Composition Comparison

SA 283 Gr C has lower carbon for better weldability, while SA 516 Gr 70 includes more manganese for toughness. Below is a table of typical compositions (in weight %, maximum unless specified):

Element

SA 283 Gr C

SA 516 Gr 70

C (Carbon)

0.24

0.28

Mn (Manganese)

0.90

0.85-1.20

P (Phosphorus)

0.035

0.035

S (Sulfur)

0.040

0.035

Si (Silicon)

0.40

0.15-0.40

Cu (Copper, min if specified)

0.20

-

Gangsteel's sa 283 grade c steel plate adheres to these for optimal performance.

 

Mechanical Properties Comparison

SA 283 Gr C has lower strength than SA 516 Gr 70, making SA 516 suitable for higher pressures. The table below details typical values:

Property

SA 283 Gr C

SA 516 Gr 70

Yield Strength (min, ksi/MPa)

30 / 205

38 / 260

Tensile Strength (ksi/MPa)

55-75 / 380-515

70-90 / 485-620

Elongation (min, % in 8")

22

17

Hardness (Brinell, approx)

119-162

143-187

Gangsteel's asme sa 283/sa 283m plates provide moderate strength close to SA 516 for cost-effective use.

 

Applications and Interchangeability

SA 283 Gr C is used in low-pressure vessels and structures, while SA 516 Gr 70 is for boilers and high-pressure vessels with better toughness. They are not interchangeable due to strength differences. Gangsteel's plates support both with certifications.

 

FAQ

  • What is the main difference in strength between SA 283 Gr C and SA 516 Gr 70?SA 283 Gr C has 55-75 ksi tensile, SA 516 Gr 70 has 70-90 ksi.
  • Is heat treatment different for SA 283 Gr C and SA 516 Gr 70?SA 283 Gr C is as-rolled, SA 516 Gr 70 is normalized for toughness.
  • What are common applications for SA 283 Gr C?General structures and low-pressure tanks.
  • Can SA 283 Gr C replace SA 516 Gr 70?No, due to lower strength and lack of normalization.
  • Where can I buy SA 283 Gr C plates?Gangsteel offers high-quality plates; contact for sa 283 grade c steel plate.

 

Other Products