GB/T 24186 brasion resistant
GB/T 24186 NM600 Abrasion Resistant Steel Plate | NM600 Wear
GB/T 24186 NM600 (also written NM 600 or NM600 wear plate) is a high-strength abrasion resistant steel plate. The grade number points to a nominal surface hardness around 600 HBW. It is used for ultra-high hardness wear parts with limited forming. HENAN GANG IRON AND STEEL CO.,LTD (Gangsteel) supplies NM600 plate for export inquiry: thickness about 8 to 60 mm, width about 1500 to 4050 mm, length about 3000 to 15000 mm, cut to size. EN 10204 3.1 is standard; 3.2 when you need third-party inspection. Put hardness band, impact, UT, or other extras on the inquiry.

Chemistry and hardness below are labeled by source. Heat (ladle) analysis follows public GB/T 24186 summaries for NM600. Confirm the standard edition and any PO supplements on the contract and mill test certificate.
Chemical Composition - GB/T 24186 NM600 (Heat Analysis)
| Element | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | B | Als |
|---|---|---|---|---|---|---|---|---|---|---|---|
| NM600, heat, % (max unless noted) | ≤0.45 | ≤0.70 | ≤1.90 | ≤0.020 | ≤0.010 | ≤1.60 | ≤2.00 | ≤0.80 | ≤0.050 | 0.0005 to 0.006 | ≥0.010 |
Source label: public GB/T 24186 NM600 heat-analysis summaries (standard grade). Cr, Ni, and Mo may be used alone or together when properties are met; residual Cu and other footnotes follow the ordered edition. D/E toughness grades use tighter limits when specified on the PO.
Chemical Composition - Mill-Typical by Thickness (Existing Grade Page)
Migrated from existing Grade600 page on this site (mill-typical). C max '045' typo on old page corrected to 0.45 to match the same page's thicker row pattern and GB/T C max. Treat as mill-typical reference, not a replacement for GB/T 24186 heat analysis on the MTC.
| Thickness mm | C max | Si max | Mn max | P max | S max | Cr max | Ni max | Mo max | B max | CEV typ. | CET typ. |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 8 to 30 | 0.45 | 0.7 | 1.00 | 0.015 | 0.01 | 1.2 | 2.5 | 0.8 | 0.004 | 0.73 | 0.55 |
| 30 to 50 | 0.47 | 0.7 | 1.00 | 0.015 | 0.01 | 1.2 | 2.5 | 0.8 | 0.004 | 0.84 | 0.59 |
Grade600 page listed hardness about 570 to 640 HBW, elongation 10% min, Charpy 20 J at -40 °C (mill-typical).
Hardness (HBW)
NM600 is named for a nominal ~600 HBW wear plate. Surface Brinell hardness per public GB/T 24186 summaries:
| Grade | Thickness | Surface HBW | Center HBW (when required) |
|---|---|---|---|
| NM600 | ≤60 mm | 570 to 640 | 510 to 640 |
Hardness is commonly checked as HBW per EN ISO 6506-1 on a milled surface below the plate skin. Report the ordered hardness band on the inquiry.
Mechanical Properties
Hardness is the primary guaranteed property for standard NM600. Tensile values below are optional / when agreed, or carried from the prior page on this URL. Do not treat blank historical cells as guarantees.
| Requirement | NM600 |
|---|---|
| Tensile strength (when agreed) | by agreement |
| Surface hardness (prior page) | min about 570 HBW |
| Tensile / yield on prior HTML | cells were incomplete - use MTC / agreed tensile |
Use the MTC and the edition named on the purchase order. Impact temperature and direction must match the PO (D/E grades when ordered).
Delivery Condition, Size and Extras
Delivery is typically quenched and tempered, or other conditions allowed by GB/T 24186 (including TMCP routes when ordered). Size range commonly offered: thickness about 8 to 60 mm, width about 1500 to 4050 mm, length about 3000 to 15000 mm. Certificate 3.1 standard, 3.2 on request. Optional UT and impact extras as ordered.
Related Grades / Equivalent Grades
| Standard / family | Comparable grade | Note |
|---|---|---|
| GB/T 24186 | GB/T 24186 NM300 | Related wear-plate grade on site |
| GB/T 24186 | GB/T 24186 NM360 | Related wear-plate grade on site |
| GB/T 24186 | GB/T 24186 NM400 | Related wear-plate grade on site |
| GB/T 24186 | GB/T 24186 NM450 | Related wear-plate grade on site |
| GB/T 24186 | GB/T 24186 NM500 | Related wear-plate grade on site |
| GB/T 24186 | GB/T 24186 NM550 | Related wear-plate grade on site |
| Industry name | Hardox 600 | Common market comparison; not a dual-cert claim |
Full GB/T 24186 set: GB/T 24186 abrasion resistant steel plate. Wear hub: Wear Resistance Steel Plate.
Density
About 7.85 g/cm³; use the project value when the design requires it.
FAQ
What is GB/T 24186 NM600?
It is a Chinese standard high-strength abrasion resistant steel plate whose grade number targets a nominal surface hardness around 600 HBW. Typical uses include ultra-high hardness wear parts with limited forming.
What hardness should I specify for NM600?
Ask for the surface HBW band that matches your thickness and drawing. Public GB/T 24186 summaries list about 570 to 640 for the primary thickness band. Put the exact band on the PO and check it on the MTC.
Is NM600 the same as AR or Hardox grades?
They may sit in a similar hardness class, but they are not automatic dual certificates. Compare hardness, chemistry, impact, and size on the MTC before substitution. See the Related table for on-site links.
Can NM600 be welded and cut?
Wear plate can usually be cut and welded with controlled procedures (preheat, low-hydrogen consumables, hydrogen control) suited to thickness and carbon equivalent. Higher HBW grades need more care. This page is not a welding procedure.
What certificate does Gangsteel supply?
EN 10204 3.1 as standard; 3.2 with third-party inspection when ordered. The MTC lists heat analysis, hardness, mechanical tests as ordered, heat-treatment condition, and any optional UT results.
Ordering Notes
Welding / forming: Follow the project WPS and qualified bend practice for the ordered thickness; this page is not a procedure.
Substitution: Do not assume NM600 equals an AR/Hardox brand grade without MTC comparison.
Before you order: Confirm GB/T 24186 edition, hardness band, delivery condition, impact, UT, and cut sizes.
On the inquiry, please include: grade GB/T 24186 NM600, thickness, width, length, hardness band, delivery condition, certificate (3.1 or 3.2), and any impact/UT extras. Gangsteel - HENAN GANG IRON AND STEEL CO.,LTD.
-
GB/T 24186 NM300-NM600 Abrasion
Overview of GB/T 24186 NM300 to NM600 abrasion resistant steel grades with links to each canonical Gangsteel pr
-
WNM vs NM Wear Plate: What WNM3
What WNM360L means vs GB/T 24186 NM360 for buyers: brand naming, MTC checks and when to order the canonical NM
-
Cutting and Bending NM500 Wear
Buyer guide to cutting and bending NM500 wear plate: plasma, flame, waterjet, bend radius and edge softening no
-
Welding NM400 Wear Plate: Prehe
Practical welding notes for NM400 wear plate: preheat, consumables, cracking risks and backing to mild steel. S
