ASTM equivalent of S355J2: the closest ASTM grade to EN 10025-2 S355J2 is ASTM A572 Grade 50 (345 MPa / 50 ksi yield, 450 MPa minimum tensile). For bridges, A709 Grade 50 is used. A572 has no Charpy requirement, so to match S355J2 (27 J at −20°C) order supplementary requirement S5 impact testing at −20°C.
Gangsteel, a steel plate exporter, supplies both S355J2 and A572 Gr 50 plate, and can dual-certify where the chemistry allows.
S355J2 vs A572 Grade 50 chemistry, % max
| Element | S355J2 ladle | S355J2 product | A572 Gr 50 heat |
|---|---|---|---|
| C | 0.20 (t≤40); 0.22 (>40) | 0.23; 0.24 | 0.23 |
| Si | 0.55 | 0.60 | 0.40 (t ≤ 40 mm) |
| Mn | 1.60 | 1.70 | 1.35 |
| P | 0.025 | 0.035 | 0.030 |
| S | 0.025 | 0.035 | 0.030 |
| Cu | 0.55 | 0.60 | 0.20 min if copper steel |
| Nb / V | – | – | per Type 1–3 |
Sources: EN 10025-2:2004 Tables 2 and 3; ASTM A572/A572M Tables 2 and 3.
ASTM A572 Gr 50 product analysis tolerances (ASTM A6/A6M)
| Element | Specified limit range, % | Under min | Over max |
|---|---|---|---|
| C | to 0.15 incl. | 0.02 | 0.03 |
| C | > 0.15 to 0.40 | 0.03 | 0.04 |
| Mn | > 0.60 to 0.90 | 0.06 | 0.08 |
| Mn | > 0.90 to 1.20 | 0.08 | 0.10 |
| Mn | > 1.20 to 1.35 | 0.09 | 0.11 |
| P | to 0.040 incl. | – | 0.010 |
| S | to 0.060 incl. | – | 0.010 |
| Si | to 0.30 incl. | 0.02 | 0.03 |
| Si | > 0.30 to 0.40 | 0.05 | 0.05 |
| Cu (min specified) | 0.20 min | 0.02 | – |
| V | to 0.10 incl. | 0.01 | 0.01 |
| V | > 0.10 to 0.25 | 0.02 | 0.02 |
| Nb | to 0.10 incl. | 0.01 | 0.01 |
Source: ASTM A6/A6M, product analysis tolerances table. The product specification gives heat analysis; product (check) analysis may fall outside the heat limits by no more than these amounts.
Mechanical properties
| Property | S355J2 (t ≤ 16 mm) | A572 Gr 50 |
|---|---|---|
| Yield, min | 355 MPa | 345 MPa |
| Tensile | 470–630 MPa | 450 MPa min |
| Elongation, min | 22% (5.65√So) | 18% in 200 mm; 21% in 50 mm |
| Charpy V | 27 J at −20°C | not required (S5 optional) |
Sources: EN 10025-2:2004; ASTM A572/A572M.
Related: A572 Grade 50 plate, S355J2 plate, S355K2 plate.
What is the ASTM equivalent of S355J2 steel?
astm equivalent of s355j2 steel Overview of S355J2 Steel
S355J2 steel is a European standard grade for hot-rolled structural steels with a minimum yield strength of 355 MPa and impact at -20°C. Its ASTM equivalent is A572 Grade 50, used for similar applications in the US. Our team offers S355J2 with ASTM equivalents like EN 10025-2 S355K2 steel and EN 10025-2 S450J0 steel, ensuring compliance for global projects.
astm equivalent of s355j2 steel Grade Mapping
S355J2 has direct equivalents in ASTM standards. The table below maps it to key ASTM grades:
|
European Grade |
ASTM Equivalent |
Notes |
|---|---|---|
|
S355J2 |
A572 Grade 50 |
Similar strength with low-temperature toughness. |
|
S355J2 |
A709 Grade 50 |
For highway bridges (A709 50W is the weathering version). |
Key Notes on Grade Mapping:
- ASTM A572 Gr 50: Primary equivalent, with yield 345 MPa and similar impact.
- Substitution is common in US projects for European specs.
Our team provides dual-certified plates, including EN 10025-2 S235J2 steel and EN 10025-2 S355JR+N.
astm equivalent of s355j2 steel Chemical Composition Comparison
Chemical compositions are similar, with low carbon for weldability. The table below compares S355J2 with ASTM A572 Gr 50 (% by weight, max values):
Key Notes on Chemical Composition:
- S355J2 has stricter P/S for toughness.
- ASTM A572 Gr 50 has broader limits but comparable weldability.
our plates meet multiple standards for easy equivalence.
astm equivalent of s355j2 steel Mechanical Properties Comparison
Mechanical properties are close, with S355J2 offering specified impact at -20°C. The table below compares S355J2 with ASTM A572 Gr 50 (for plates up to 16 mm):
Key Notes on Mechanical Properties:
- Both have similar strength, but EN 10025-2 guarantees impact.
- ASTM A572 Gr 50 is versatile but may need testing for cold use.
Our team provides tested plates for reliable performance.
astm equivalent of s355j2 steel Applications and Substitution Considerations
S355J2 is used in construction (bridges), offshore (platforms), and machinery (cranes). Its ASTM equivalent A572 Gr 50 substitutes for:
- High-rise buildings and heavy bridges.
- Wind turbines and moderate-cold machinery.
Substitution considerations:
- Standards Compliance: EN for Europe, ASTM for US.
- Toughness: EN has impact testing; ASTM may not.
- Cost/Availability: ASTM in US, EN in Europe; our team bridges this.
For low-temperature, check EN 10025-2 S355J2 steel or EN 10025-2 S355K2 steel.
Why Choose Us for S355J2 Equivalents?
Our team is a trusted supplier of S355J2 equivalents, offering:
- Certified Quality: Plates undergo ultrasonic testing and chemical analysis to meet EN/ASTM standards.
- Customization: Available in thicknesses from 6–300 mm, with options for normalization.
- Global Supply: Competitive pricing and reliable delivery worldwide.
- Technical Support: Guidance on equivalents like EN 10025-2 S275J2 steel or EN 10025-2 S355JR+N.
Summary
The ASTM equivalent of S355J2 is A572 Grade 50, with similar high strength and low-temperature toughness for structural use. our high-quality plates ensure compliance for your projects. For more, explore our BS EN 10025-2 material grade guide.
More reading: EN 10025-2 S355J2
ASTM Equivalent of S355J2 Steel FAQ
What is the ASTM equivalent of S355J2?
ASTM A572 Grade 50, with impact testing added if −20°C toughness is needed. A709 Grade 50 and A992 are equivalents for bridges and wide-flange shapes.
Is S355 the same as A572 Grade 50?
Very close but not identical: S355 has a higher 355 MPa yield and a 470–630 MPa tensile range; A572 Gr 50 has 345 MPa yield and 450 MPa minimum tensile.
Is A992 equivalent to S355J2?
A992 is a shapes specification with 345–450 MPa yield; it is a common US substitute for S355 beams but has no impact requirement by default.
Can A36 replace S355J2?
No. A36 has only 250 MPa yield and no impact requirement; it is closer to S235/S275.
What is S355J2 material?
A non-alloy structural steel to EN 10025-2 with 355 MPa yield and 27 J Charpy at −20°C, material number 1.0577.
What is the ASTM equivalent of S355J2H?
For hollow sections, ASTM A500 Grade C or A1085 are the usual substitutes.
-
BHW35 Steel Plate for Sale | RF
BHW35 / 13MnNiMo5-4 (DIWA 353 family): identity, chemistry, mechanical properties, related grades, and RFQ note
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
