S355J2 EN 10025-2 equivalent: S355J2 (material number 1.0577) is a non-alloy structural steel with 355 MPa minimum yield and 27 J Charpy at −20°C. Its common equivalents are ASTM A572 Grade 50 (no impact requirement unless ordered), the old DIN 17100 St52-3, GB/T 1591 Q355D, UNI Fe 510 D and JIS SM490B. A572 Gr 50 is the usual US substitute, with 345 MPa yield and 450 MPa minimum tensile.
Gangsteel, a steel plate exporter, supplies EN 10025-2 S355J2 plate. Chemistry below is from EN 10025-2:2004, which gives both ladle and product analysis.
S355J2 chemical composition, % max (t ≤ 16 / 16–40 / >40 mm)
| Element | Ladle analysis | Product analysis | ASTM A572 Gr 50 (heat) |
|---|---|---|---|
| C | 0.20 / 0.20 / 0.22 | 0.23 / 0.23 / 0.24 | 0.23 |
| Si | 0.55 | 0.60 | 0.40 (t ≤ 40 mm) |
| Mn | 1.60 | 1.70 | 1.35 |
| P | 0.025 | 0.035 | 0.030 |
| S | 0.025 | 0.035 | 0.030 |
| Cu | 0.55 | 0.60 | – |
| N | – (fully killed) | – | – |
| CEV (t ≤ 30 / 30–40 mm) | 0.45 / 0.47 | – | – |
Sources: EN 10025-2:2004 Tables 2, 3 and 6; ASTM A572/A572M Table 3 (Type 1–3 add Nb and/or V). EN 10025-2:2019 keeps the J2 limits at P 0.025, S 0.025.
ASTM A572 Gr 50 product analysis tolerances (ASTM A6/A6M)
| Element | Specified limit range, % | Under min | Over max |
|---|---|---|---|
| C | to 0.15 incl. | 0.02 | 0.03 |
| C | > 0.15 to 0.40 | 0.03 | 0.04 |
| Mn | > 0.60 to 0.90 | 0.06 | 0.08 |
| Mn | > 0.90 to 1.20 | 0.08 | 0.10 |
| Mn | > 1.20 to 1.35 | 0.09 | 0.11 |
| P | to 0.040 incl. | – | 0.010 |
| S | to 0.060 incl. | – | 0.010 |
| Si | to 0.30 incl. | 0.02 | 0.03 |
| Si | > 0.30 to 0.40 | 0.05 | 0.05 |
| Cu (min specified) | 0.20 min | 0.02 | – |
| V | to 0.10 incl. | 0.01 | 0.01 |
| V | > 0.10 to 0.25 | 0.02 | 0.02 |
| Nb | to 0.10 incl. | 0.01 | 0.01 |
Source: ASTM A6/A6M, product analysis tolerances table. The product specification gives heat analysis; product (check) analysis may fall outside the heat limits by no more than these amounts.
Mechanical properties (t ≤ 16 mm)
| Property | S355J2 | ASTM A572 Gr 50 |
|---|---|---|
| Yield, min | 355 MPa | 345 MPa (50 ksi) |
| Tensile | 470–630 MPa (t < 3 mm: 510–680) | 450 MPa (65 ksi) min |
| Elongation, min | 22% (long., 3–40 mm) | 18% in 200 mm; 21% in 50 mm |
| Charpy V, min | 27 J at −20°C | not required (supplementary S5) |
Sources: EN 10025-2 Tables 7 and 9; ASTM A572/A572M Table 4.
Related: EN 10025-2 S355J2 plate, ASTM A572 Grade 50 plate, GB/T 1591 Q355D plate.
equivalent of s355j2 en 10025-2 Overview of S355J2 EN 10025-2
S355J2 is a European standard grade for hot-rolled structural steels with a minimum yield strength of 355 MPa and impact at -20°C. Its equivalents include ASTM A572 Grade 50, used for similar applications worldwide. Our team offers S355J2 with equivalents like EN 10025-2 S355K2 steel and EN 10025-2 S450J0 steel, ensuring compliance for global projects.
equivalent of s355j2 en 10025-2 Grade Mapping
S355J2 EN 10025-2 has direct equivalents in other standards. The table below maps it to key grades:
|
Standard |
Equivalent Grade |
Notes |
|---|---|---|
|
ASTM (USA) |
A572 Grade 50 |
Similar strength for construction. |
|
DIN (Germany) |
ST52-3 |
Equivalent mechanical properties. |
|
JIS (Japan) |
SM490YA |
For welded structures. |
|
GB (China) |
Q355D |
Matches impact at -20°C. |
|
NFA (France) |
E36-3 |
For construction applications. |
|
UNI (Italy) |
Fe 510 D |
Comparable tensile strength. |
|
BS (UK) |
50 C |
For welded structures. |
|
UNE (Spain) |
AE 355 D |
Similar characteristics. |
Key Notes on Grade Mapping:
- ASTM A572 Gr 50: Primary equivalent, with yield 345 MPa for high-strength use.
- DIN ST52-3: Match for European projects.
- JIS SM490YA: Good for Asian sourcing, with comparable weldability.
- GB Q355D: Chinese equivalent for high-strength low-alloy needs.
These mappings are functional, but verify for specific codes. Our team provides dual-certified plates, including EN 10025-2 S235J2 steel and EN 10025-2 S355JR+N.
equivalent of s355j2 en 10025-2 Chemical Composition Comparison
Chemical compositions are similar, with low carbon for weldability. The table below compares S355J2 EN 10025-2 with ASTM A572 Gr 50 (% by weight, max values):
Key Notes on Chemical Composition:
- S355J2 has stricter P/S for toughness.
- ASTM A572 Gr 50 has broader limits but comparable weldability.
our plates meet multiple standards for easy equivalence.
equivalent of s355j2 en 10025-2 Mechanical Properties Comparison
Mechanical properties are close, with S355J2 offering specified impact at -20°C. The table below compares S355J2 EN 10025-2 with ASTM A572 Gr 50 (for plates up to 16 mm):
Key Notes on Mechanical Properties:
- Both have similar strength, but EN 10025-2 guarantees impact.
- ASTM A572 Gr 50 is versatile but may need testing for cold use.
Our team provides tested plates for reliable performance.
equivalent of s355j2 en 10025-2 Applications and Substitution Considerations
S355J2 EN 10025-2 is used in construction (bridges), offshore (platforms), and machinery (cranes). Its equivalent A572 Gr 50 substitutes for:
- High-rise buildings and heavy bridges.
- Wind turbines and moderate-cold machinery.
Substitution considerations:
- Standards Compliance: EN for Europe, ASTM for US.
- Toughness: EN has impact testing; ASTM may not.
- Cost/Availability: ASTM in US, EN in Europe; our team bridges this.
For low-temperature, check EN 10025-2 S355J2 steel or EN 10025-2 S355K2 steel.
Why Choose Us for S355J2 EN 10025-2 Equivalents?
Our team is a trusted supplier of S355J2 EN 10025-2 equivalents, offering:
- Certified Quality: Plates undergo ultrasonic testing and chemical analysis to meet EN/ASTM standards.
- Customization: Available in thicknesses from 6–300 mm, with options for normalization.
- Global Supply: Competitive pricing and reliable delivery worldwide.
- Technical Support: Guidance on equivalents like EN 10025-2 S275J2 steel or EN 10025-2 S355JR+N.
Summary
The equivalent of S355J2 EN 10025-2 is ASTM A572 Grade 50, DIN ST52-3, JIS SM490YA, and GB Q355D, with similar high strength and low-temperature toughness for structural use. our high-quality plates ensure compliance for your projects. For more, explore our BS EN 10025-2 material grade guide.
More reading: EN 10025-2 S355J2
S355J2 EN 10025-2 Equivalent Grades FAQ
What is S355J2 equivalent to in ASTM?
ASTM A572 Grade 50 is the closest; specify supplementary Charpy testing at −20°C if you need S355J2-level toughness.
Is S355J2 the same as St52-3?
Practically yes. St52-3 from the withdrawn DIN 17100 was replaced by S355J2 (S355J2G3) in EN 10025.
What is the Chinese equivalent of S355J2?
GB/T 1591 Q355D, which is also impact tested at −20°C. Q355B is closer to S355JR.
What is the JIS equivalent of S355J2?
JIS G3106 SM490B is the usual match; SM490C has a 0°C impact test and SM490YB has a higher 365 MPa yield.
Is S355J2 the same as S355J2+N?
Same grade; +N means the plate is delivered normalized or normalized rolled, which is required for some sizes and specifications.
What is the difference between S355JR and S355J2?
Only the impact test temperature: JR is tested at +20°C and J2 at −20°C, with stricter P and S limits for J2.
What does 1.0577 mean?
1.0577 is the EN 10027-2 material number for S355J2.
-
BHW35 Steel Plate for Sale | RF
BHW35 / 13MnNiMo5-4 (DIWA 353 family): identity, chemistry, mechanical properties, related grades, and RFQ note
-
ASTM A516 Grade 70 Equivalent:
ASTM A516 Grade 70 equivalents include ASME SA516 Gr 70, EN 10028-2 P355GH and BS 1501 224-490. Gangsteel compa
-
What is the difference between
we supply high-quality A516 Gr 70 steel plate for pressure vessel applications and other standards like ASTM A2
-
P355GH AND S355J2 Steel Plates
EN10028-2 P355GH for High-Strength Low-Alloy Columbium-Vanadium Structural Steel EN10025-2 S355J2 Structural St
