LR DH40 steel plate, also written as LR/DH40, LR Grade DH40, Lloyd's Register DH40 or simply DH40 ship steel plate, is the higher-strength hull structural steel of Lloyd's Register Rules for Ships (IACS UR W11 higher-strength family) with 390 MPa minimum yield, 510-650 MPa tensile strength and Charpy V-notch toughness at -20°C [-4°F]. In the grade name, "D" is the toughness class, "H" means higher strength and "40" refers to the strength level (historically about 40 kgf/mm²). Gangsteel, a steel plate exporter, supplies LR DH40 plates cut to size for shipbuilding, offshore platforms and marine structures.

Data source: Per IACS UR W11 (ordinary/higher-strength hull structural steel) as adopted in Lloyd's Register Rules for Ships. Verify the current LR edition before ordering.

LR/DH40 Chemical Composition (Heat Analysis)

 

ElementCMnSiPSAl (acid sol.)
DH40, %0.18 max0.90-1.600.10-0.500.035 max0.035 max0.015 min
ElementNbVTiCuCrNi / Mo
DH40, %0.02-0.050.05-0.100.02 max0.35 max0.20 max0.40 max / 0.08 max

Per IACS UR W11 / LR Rules for Ships (higher-strength hull structural steel). Nb, V and Al grain-refining elements may be used singly or in combination; when used in combination the individual minima do not apply. Where acid-soluble Al is not less than 0.015%, the Si minimum does not apply. Carbon equivalent: Ceq = C + Mn/6 + (Cr+Mo+V)/5 + (Ni+Cu)/15 (%). 依据 IACS UR W11 / LR Rules for Ships.

Product Analysis (Check Analysis)

 

IACS UR W11 / LR Rules for Ships do not separately tabulate product (check) analysis limits for higher-strength grades. When product analysis is required, the finished plate shall meet the heat limits subject to ASTM A6/A6M Table A permitted variations (same practice as ABS MW Pt2).

ElementHeat analysis limitProduct analysis (heat ± A6)
C0.18 max0.22 max
Mn0.90-1.600.81–1.72
Si0.10-0.500.04–0.56
P0.035 max0.045 max
S0.035 max0.045 max
Al (acid sol.)0.015 minno A6 Table A tolerance; product value not tabulated
Nb0.02-0.050.010–0.060
V0.05-0.100.040–0.110
Ti0.02 max0.03 max
Cu0.35 max0.38 max
Cr0.20 max0.24 max
Ni0.40 max0.43 max
Mo0.08 max0.09 max

依据 IACS UR W11 / LR Rules for Ships. Product analysis applies only when specified; for a range, results may not vary both above and below it.

LR/DH40 Mechanical Properties

 

GradeYield strength, minTensile strengthElongation, min
LR/DH40390 MPa [57 ksi]510-650 MPa [74-94 ksi]20%

Per IACS UR W11 / LR Rules for Ships. Yield and tensile values apply for the full thickness range covered by the grade (typically up to 100 mm for these ship plates).

Charpy V-Notch Impact Requirements (-20°C [-4°F])

 

ThicknessTest temperatureLongitudinal, avg minTransverse, avg min
t≤50 mm-20°C [-4°F]39 J26 J
50<t≤70 mm-20°C [-4°F]46 J31 J
70<t≤100 mm-20°C [-4°F]55 J37 J

Per IACS UR W11 / LR Rules for Ships. Average of three full-size Charpy V-notch specimens; not more than one value below the average and none below 70% of it. Longitudinal values shown; transverse values apply when required by the rules or purchase order.

Delivery Condition and Deoxidation

Deoxidation: Killed, fine-grain practice. Delivery condition: DH grades are typically normalized or TMCP to guarantee -20°C Charpy toughness. Optional extras by agreement include ultrasonic testing, Z-direction (Z15/Z25/Z35) through-thickness testing and third-party LR survey.

Thickness Coverage

Higher-strength LR AH/DH/EH/FH 32/36/40 plates are commonly supplied from about 6 mm to 100 mm thick (up to 150 mm by agreement). Width 1500-4000 mm and length 6000-18000 mm are typical.

Equivalent Steel Grades of LR/DH40

 

Society / StandardEquivalent grade
LR (Lloyd's Register)LR/DH40
ABSABS DH40 steel plate (AB/DH40)
CCSCCS DH40 steel plate
ASTM A131/A131MASTM A131 DH40 steel plate
DNVNV D40
GLGL-D40
BVBV/DH40
NK / KR / RINAK D40 / R D40 / RI/D40

IACS member societies harmonize ordinary and higher-strength hull grades under UR W11; dual certification (for example LR + ABS, or LR + ASTM A131) is common when ordered that way.

FAQ about LR DH40 Steel Plate

What is LR DH40 steel plate?

It is a higher-strength hull structural steel under Lloyd's Register Rules for Ships (IACS UR W11), with 390 MPa minimum yield, 510-650 MPa tensile strength and Charpy toughness at -20°C [-4°F].

What does DH40 stand for?

The letter D is the toughness class (Charpy at -20°C), H means higher strength, and 40 is the strength level (historically about 40 kgf/mm², now 390 MPa min yield).

What is the yield strength of LR DH40?

Minimum 390 MPa (57 ksi), tensile 510-650 MPa (74-94 ksi), elongation about 20% min.

What is the impact test temperature for LR DH40?

Charpy V-notch at -20°C [-4°F]. Longitudinal average minima are 39 J up to 50 mm, 46 J for 50-70 mm and 55 J for 70-100 mm.

What is the difference between LR DH40 and LR EH40?

DH40 is tested at -20°C; EH40 at -40°C. Same strength class.

Is LR DH40 the same as ABS DH40 or ASTM A131 DH40?

Requirements are essentially harmonized under IACS UR W11. ABS DH40 and ASTM A131 DH40 are counterparts; dual certification is common when ordered with the required surveys.

Is LR DH40 weldable?

Yes. Controlled carbon and Ceq give good weldability; preheat may be required for thick sections depending on Ceq and restraint.

What heat treatment is required for LR DH40?

DH40 is typically normalized or TMCP to guarantee -20°C toughness.

What thickness is available for LR DH40?

Typical supply is about 6-100 mm thick (up to 150 mm by agreement), 1500-4000 mm wide and 6000-18000 mm long.

Other LR Steel Plate Grades

LR Grade A steel plate | LR Grade B steel plate | LR Grade D steel plate | LR Grade E steel plate | LR AH32 steel plate | LR AH36 steel plate | LR AH40 steel plate | LR DH32 steel plate | LR DH36 steel plate | LR EH32 steel plate | LR EH36 steel plate | LR EH40 steel plate | LR FH32 steel plate | LR FH36 steel plate | LR FH40 steel plate

Equivalent Class Society Grades

LR DH40 corresponds to the same grade under the other IACS member classification societies and ASTM A131: CCS DH40 steel plate, ABS DH40 steel plate, ASTM A131 DH40 steel plate, GL DH40 steel plate, DNV D40 steel plate, BV DH40 steel plate, NK D40 steel plate, KR D40 steel plate, RINA DH40 steel plate.

Other Products