LR steel plate
LR Grade B Steel Plate | Grade B Shipbuilding Steel Plate
LR Grade B steel plate, also called LR/B, LR/B, Lloyd's Register Grade B or simply Grade B ship steel plate, is an ordinary-strength hull structural steel with 0°C Charpy toughness under Lloyd's Register Rules for Ships (IACS UR W11 ordinary-strength family). All four ordinary grades A, B, D and E share 235 MPa minimum yield and 400-520 MPa tensile strength; the grade letter sets the toughness requirement. Gangsteel, a steel plate exporter, supplies LR Grade B general strength steel plate for ship hulls, decks, bulkheads, barges and general marine structures.
Data source: Per IACS UR W11 (ordinary/higher-strength hull structural steel) as adopted in Lloyd's Register Rules for Ships. Verify the current LR edition before ordering.
LR/B Chemical Composition (Heat Analysis)
| Grade | C, max | Mn | Si | P, max | S, max | C + Mn/6, max |
|---|---|---|---|---|---|---|
| LR/B | 0.21 | ≥0.80 | 0.35 | 0.035 | 0.035 | 0.40 |
Per IACS UR W11 / LR Rules for Ships (ordinary-strength hull structural steel). Ni, Cr, Mo and Cu are to be determined and reported. Carbon equivalent: Ceq = C + Mn/6 + (Cr+Mo+V)/5 + (Ni+Cu)/15 (%); crack sensitivity: Pcm = C + Si/30 + Mn/20 + Cu/20 + Ni/60 + Cr/20 + Mo/15 + V/10 + 5B (%). 依据 IACS UR W11 / LR Rules for Ships.
Product Analysis (Check Analysis)
IACS UR W11 / LR Rules for Ships do not separately tabulate product (check) analysis limits for ordinary-strength grades. When product analysis is required, the finished plate shall meet the heat limits subject to ASTM A6/A6M Table A permitted variations (same practice as ABS MW Pt2 referencing ASTM A6 chemical tolerances).
| Element | Heat analysis limit | Product analysis (heat ± A6) |
|---|---|---|
| C | 0.21 max | 0.25 max (heat + A6 over-max) |
| Mn | ≥0.80 | min-only; no A6 product band keyed to upper limit |
| Si | 0.35 max | 0.40 max |
| P | 0.035 max | 0.045 max |
| S | 0.035 max | 0.045 max |
| C + Mn/6 | 0.40 max | calculated from heat analysis |
| Ni, Cr, Mo, Cu | to be determined and reported | - |
依据 IACS UR W11 / LR Rules for Ships. Product analysis applies only when specified; for a range, results may not vary both above and below it.
LR/B Mechanical Properties
| Grade | Yield strength, min | Tensile strength | Elongation, min |
|---|---|---|---|
| LR/B | 235 MPa [34 ksi] | 400-520 MPa [58-75 ksi] | 22% |
Per IACS UR W11 / LR Rules for Ships. Yield and tensile values apply for the full thickness range covered by the grade (typically up to 100 mm for these ship plates).
Charpy V-Notch Impact Requirements (0°C [32°F])
| Thickness | Test temperature | Longitudinal, avg min | Transverse, avg min |
|---|---|---|---|
| t≤50 mm | 0°C [32°F] | 27 J | 20 J |
| 50<t≤70 mm | 0°C [32°F] | 34 J | 24 J |
| 70<t≤100 mm | 0°C [32°F] | 41 J | 27 J |
Per IACS UR W11 / LR Rules for Ships. Average of three full-size Charpy V-notch specimens; not more than one value below the average and none below 70% of it.
Delivery Condition and Deoxidation
Deoxidation: Killed or semi-killed (t≤50 mm); killed (t>50 mm). Delivery condition: As-rolled, controlled rolled, normalized or TMCP. Impact testing at 0°C governs delivery for thicker plates. Optional extras by agreement include ultrasonic testing, Z-direction (Z15/Z25/Z35) through-thickness testing and third-party LR survey.
Thickness Coverage
Ordinary-strength LR grades are commonly supplied from about 6 mm to 100 mm thick (wider/thicker by agreement with LR). Width 1500-4000 mm and length 6000-18000 mm are typical mill ranges.
Equivalent Steel Grades of LR/B
| Society / Standard | Equivalent grade |
|---|---|
| LR (Lloyd's Register) | LR/B |
| ABS | ABS B steel plate (AB/B) |
| CCS | CCS B steel plate |
| ASTM A131/A131M | ASTM A131 Grade B steel plate |
| DNV | NV B |
| GL | GL-B |
| BV | BV/B |
| NK / KR / RINA | K B / R B / RI/B |
IACS member societies harmonize ordinary and higher-strength hull grades under UR W11; dual certification (for example LR + ABS, or LR + ASTM A131) is common when ordered that way.
FAQ about LR Grade B Steel Plate
What is LR Grade B steel plate?
It is an ordinary-strength hull structural steel under Lloyd's Register Rules for Ships (IACS UR W11 family), with 235 MPa minimum yield and 400-520 MPa tensile strength.
What does the letter B mean in LR Grade B?
Grade B shares A's strength but has tighter Mn/Si/deoxidation rules and Charpy testing at 0°C.
What is the yield strength of LR Grade B?
Minimum 235 MPa (34 ksi), with tensile strength 400-520 MPa (58-75 ksi) and elongation about 22% min.
Does LR Grade B require impact testing?
Yes. Charpy V-notch at 0°C [32°F], with energy rising by thickness band (27/20 J up to 50 mm L/T, then 34/24 and 41/27 J).
Is LR Grade B the same as ABS Grade B or ASTM A131 Grade B?
Requirements are essentially harmonized under IACS UR W11. ABS and ASTM A131 Grade B are counterparts; plates can be dual-certified when ordered with the required society survey and marking.
Is LR Grade B weldable?
Yes. Low carbon and controlled carbon equivalent give good weldability with standard shipyard procedures; preheat depends on thickness, Ceq and restraint.
What thickness is available for LR Grade B?
Typical mill supply is about 6-100 mm thick, 1500-4000 mm wide and 6000-18000 mm long; thicker or wider plates by agreement with LR.
What heat treatment is used for LR Grade B?
As-rolled, controlled rolled, normalized or TMCP depending on thickness and impact requirements.
Other LR Steel Plate Grades
LR Grade A steel plate | LR Grade D steel plate | LR Grade E steel plate | LR AH32 steel plate | LR AH36 steel plate | LR AH40 steel plate | LR DH32 steel plate | LR DH36 steel plate | LR DH40 steel plate | LR EH32 steel plate | LR EH36 steel plate | LR EH40 steel plate | LR FH32 steel plate | LR FH36 steel plate | LR FH40 steel plate
Equivalent Class Society Grades
LR Grade B corresponds to the same grade under the other IACS member classification societies and ASTM A131: CCS Grade B steel plate, ABS Grade B steel plate, ASTM A131 Grade B steel plate, GL Grade B steel plate, DNV Grade B steel plate, BV Grade B steel plate, NK Grade B steel plate, KR Grade B steel plate, RINA Grade B steel plate.
-
LR AH36 Steel Plate | AH36 Ship
LR AH36 higher-strength ship steel plate: 355 MPa yield, 490-620 MPa tensile, Charpy at 0C, chemistry and equiv
-
LR FH36 Steel Plate | FH36 Ship
LR FH36 higher-strength ship steel plate: 355 MPa yield, 490-620 MPa tensile, Charpy at -60C, chemistry and equ
-
LR DH36 Steel Plate | DH36 Ship
LR DH36 higher-strength ship steel plate: 355 MPa yield, 490-620 MPa tensile, Charpy at -20C, chemistry and equ
-
LR DH69 Steel Plate | DH69 Ship
LR DH69 extra high strength steel plate: 690 MPa min yield, 770-940 MPa tensile, Charpy 69J L/46J T at -20C, TM
