430 stainless steel mechanical properties

430 Stainless Steel Mechanical Properties

Gangsteel supplies 430 stainless steel with consistent mechanical properties that fully comply with the leading international standards. We produce material to any of the following specifications:

• JIS G4305 SUS430(Japan)
• ASTM A240 Type 430(USA)
• EN 10088-2 1.4016 / X6Cr17(Europe)
• DIN EN 1.4016(Germany)
• GB/T 3280 10Cr17 / 1Cr17(China)

The mechanical properties listed below are for the annealed condition, which is the standard delivery state for cold-rolled 430 stainless steel sheet and coil. Values are minimum requirements unless noted as typical.

Mechanical Properties Table (Annealed Condition)

These properties make 430 stainless steel highly formable for deep drawing, bending, and stamping while providing sufficient strength for structural and decorative uses.

Additional Notes

• At elevated temperatures: 430 retains good strength up to 815 °C (intermittent service) and 760 °C (continuous service) with excellent oxidation resistance.
• Low-temperature toughness: Remains ductile down to cryogenic levels, unlike some martensitic grades.
• Work-hardening: Moderate; cold working increases strength but reduces ductility.

For full product details on 430 stainless steel sheet or coil with these mechanical properties, please see our:

• a240 Type_430 stainless steel sheet
• EN10088 2 X6Cr17 stainless steel sheet
• DIN 1.4016 stainless steel sheet
• GB/T 10Cr17 1Cr17 stainless steel sheet
• JIS G4305 SUS 430 stainless steel sheet

Gangsteel guarantees every batch meets or exceeds the mechanical property requirements of the chosen standard, with full mill test certificates and third-party inspection available. If you need properties in a specific temper, hardened condition, or custom testing, contact our technical team for details.