430 stainless steel thickness gauge

430 Stainless Steel Sheet Thickness Gauge

Gangsteel produces 430 stainless steel sheet in a full range of thickness gauges and custom sizes while maintaining full compliance with the leading international standards. We can manufacture to any of the following major specifications to meet your exact project requirements:

• JIS G4305 SUS430(Japan)
• ASTM A240 Type 430(USA)
• EN 10088-2 1.4016 / X6Cr17(Europe)
• DIN EN 1.4016(Germany)
• GB/T 3280 10Cr17 / 1Cr17(China)
• BS 1449 430S17(United Kingdom)
• ISO 4954 X6Cr17(International)

Whether you need a standard gauge or a precise custom thickness, Gangsteel delivers consistent quality, full traceability, and competitive pricing from our advanced Chinese production facilities.

430 Stainless Steel Thickness Gauge Chart

The table below shows the most commonly requested thickness gauges for 430 stainless steel sheet, with both imperial gauge numbers and exact metric equivalents. These are the standard sizes we keep in stock and can ship quickly.

Gangsteel can also supply any intermediate or non-standard thickness from 0.25 mm to 6.0 mm with tight tolerances (±0.03 mm for most gauges). Custom slitting and cut-to-length services are available.

Chemical Composition

Our 430 sheets strictly conform to the chemical limits of all listed standards:

Mechanical Properties (Annealed Condition)

Available Finishes for Any Thickness Gauge

• 2B (industrial matte)
• BA (bright annealed mirror)
• NO.4 (satin brushed)
• HL (hairline)

All plates/sheets are protected with PVC/PE film for safe export.

Manufacturing Process at Gangsteel

We start with high-purity AOD-refined material, hot roll, then cold roll to your exact thickness gauge on precision mills. Annealing, pickling, and final skin-passing ensure uniform properties and surface quality. Every order receives rigorous inspection and third-party certification.

For the same high-quality material in coil form or other finishes, we recommend our a240 Type_430 stainless steel sheet, EN10088 2 X6Cr17 stainless steel sheet, DIN 1.4016 stainless steel sheet, GB/T 10Cr17 1Cr17 stainless steel sheet, or JIS G4305 SUS 430 stainless steel sheet.

Key Advantages of Gangsteel 430 Thickness Gauge Sheet

• Any gauge from 0.25 mm to 6.0 mm with tight tolerances
• No minimum order penalty for non-standard thicknesses
• Same fast delivery as standard sizes
• Cost-effective — eliminate waste from trimming standard coils
• Consistent quality across every custom gauge

Wide Range of Applications

430 stainless steel sheet in custom thickness gauges is ideal for:

• Appliance manufacturers needing exact gauges for stamping lines
• Automotive suppliers requiring special thicknesses for trim
• Architectural fabricators wanting precise sheet weights
• Food equipment makers needing specific material thickness
• Any project where material waste must be minimized

Why Choose Gangsteel?

With decades of experience and state-of-the-art leveling and slitting lines, Gangsteel turns your thickness gauge requirement into reality without compromising quality or lead time. We maintain large inventory of mother coils so even unusual gauges ship quickly. Flexible MOQ starts at just 5 tons, and every order comes with complete mill test reports and any third-party inspection you need.

Contact our technical sales team today for the latest 430 stainless steel thickness gauge pricing, samples, or a custom quotation. Let Gangsteel be your reliable partner for 430 stainless steel sheet in any thickness gauge.