ABS Steel Plate
ABS AQ43 Extra High Strength Q&T Ship Plate – Properties

ABS AQ43 (also written AB/AQ43, ABS Grade AQ43, AQ43 steel plate) is an extra-high-strength hull structural steel supplied quenched and tempered (Q&T). The "43" denotes a minimum yield strength of 420 MPa and the letter A an impact test temperature of 0°C.
Gangsteel is specialized in supplying ABS Extra high strength steel plate in ABS Grade AQ43. For more information of Grade AQ43 steel plate, please check them in following:
AB/AQ43 Extra high Strength Chemical Composition in Tempering and Quenching
| Element | Heat analysis (max/min) | Product analysis |
|---|---|---|
| C | ≤ 0.18 | ≤ 0.22 |
| Mn | ≤ 1.70 | ≤ 1.84 |
| Si | ≤ 0.80 | ≤ 0.86 |
| P | ≤ 0.025 | ≤ 0.035 |
| S | ≤ 0.015 | ≤ 0.025 |
| Al (total) | ≥ 0.018 | — (no tolerance in ASTM A6 Table A; product value not given) |
| Nb | ≤ 0.06 | ≤ 0.07 |
| V | ≤ 0.12 | ≤ 0.14 |
| Ti | ≤ 0.05 | ≤ 0.06 |
| Ni | ≤ 3.50 | ≤ 3.57 |
| Cu | ≤ 0.50 | ≤ 0.53 |
| Cr | ≤ 2.00 | ≤ 2.06 |
| Mo | ≤ 0.70 | ≤ 0.74 |
| N | ≤ 0.015 | ≤ 0.020 |
| Ca | ≤ 0.005 | — (no tolerance in ASTM A6 Table A; product value not given) |
| B | ≤ 0.005 | product analysis not applicable (A6 Table A) |
ABS 2022: limits shown are for the quenched and tempered (QT) condition; N/NR/CR and TM supply have different limits in Table 4A. Al/N ≥ 2:1 (not required when other N-binding elements are used); higher C or N may be agreed with ABS; Ni content agreed at qualification; final chemistry must also meet the mill's ABS-approved specification. Product analysis = heat limit ± ASTM A6/A6M Table A permitted variation (band chosen by the specified maximum/upper limit); applies only when product (check) analysis is required; for a range, results may not vary both above and below it. Per ABS Rules for Materials and Welding Part 2 (2022); product analysis tolerances per ABS 2-1-2/5.3 (“chemical tolerances of ASTM A6”) and ASTM A6/A6M 7.2, Table A (also invoked by ASTM A131). Heat limits: ABS 2-1-8/4 Table 4A (2022), QT column.
Crack Sensitivity: Pcm = (C+Si/30+Mn/20+Cu/20+Ni/60+Cr/20+Mo/15+V/10+5B)%
Carbon Equivalent: Ceq = 【C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15】%
AB/AQ43 Extra high strength property in tempering and quenching
| Grade | Yield ReH min (MPa) | Tensile Rm (MPa) | Elongation A5 min (%) | Charpy test temp (°C) | Impact energy avg min, longitudinal (J) | Impact energy avg min, transverse (J) |
|---|---|---|---|---|---|---|
| AB/AQ43 | 420 | 530-680 | 18 | 0 | 41 | 27 |
Source: ABS Rules Pt 2, 2-1-8, Table 5A. Either longitudinal or transverse specimens per the order.
Boiler steel plates| Alloy steel plates| High strength plate| Carbon steel plate
|
Equivalent steel grade of AB/AQ43 |
|||||||
If you need more stock steel plates in shipbuilding steel plate, please click warehouse sizes.
Related steel grades: AB/AQ47, AB/AQ51, AB/AQ63, AB/AQ70
|
General Strength |
||||
|
High Strength |
||||
|
Extra Strength |
||||
FAQ
What is ABS AQ43 steel?
An extra-high-strength hull structural steel supplied quenched and tempered, with minimum yield strength 420 MPa and tensile strength 530-680 MPa.
What is the impact test temperature for ABS AQ43?
0°C, with minimum average energy 42 J longitudinal / 28 J transverse.
What does the 'Q' in AQ43 mean?
It denotes the extra-high-strength quenched-and-tempered series of hull steels in ABS Rules (cf. IACS UR W16).
What is ABS AQ43 equivalent to?
The same AQ43 designation exists in other IACS societies (DNV, LR, BV, CCS) under IACS UR W16; certification must match the project's classification society.
What is the elongation of ABS AQ43?
Per the page table, minimum elongation is 18%.
-
ABS Grade A Plate – Propertie
ABS Grade A ordinary-strength hull plate: chemical composition, 235 MPa yield, 400-520 MPa tensile, Charpy test
-
ABS EH36 Steel Plate – Proper
ABS EH36 higher-strength ship plate: 355 MPa min yield, 490-620 MPa tensile, Charpy at -40°C, chemistry table
-
ABS DH36 Steel Plate – Proper
ABS DH36 higher-strength ship plate: 355 MPa min yield, 490-620 MPa tensile, Charpy at -20°C, chemistry table
-
ABS AH36 Steel Plate – Proper
ABS AH36 higher-strength ship plate: 355 MPa min yield, 490-620 MPa tensile, Charpy at 0°C, chemistry table an
